0
Owner's of the Electrolux Range Electrolux Range gave it a score of 0 out of 5. Here's how the scores stacked up:
41
Care & Cleaning
Adhere to the Following Cleaning Precautions:
• Allow the oven to cool before cleaning.
• Wear rubber gloves when cleaning any exterior parts of the oven manually.
During the self-cleaning cycle, the outside of the oven can become very hot to the touch.
DO NOT leave small children unattended near the appliance.
Before cleaning any part of the oven, be sure the oven is turned off or else push
pad. Wait until the oven is cool.
use commercial oven cleaners or oven protective coatings in or around any part of
the self-cleaning oven. DO NOT clean the oven door gasket. The gasket on the oven door
is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
DO NOT use any cleaning materials on the gasket. Doing so could damage it. DO NOT use
aluminum foil to line the oven bottom. This may affect cooking or foil could melt and damage
the oven surface.
USING THE SELF-CLEAN FEATURE
The health of some birds is extremely sensitive to the fumes given off
during the self-clean cycle of any oven. Move birds to another well ventilated room.
Clean Frame
Clean
Preparing the Oven for Self-Cleaning:
1. Remove any excess spillovers in the oven cavity
before starting the self-cleaning cycle. To clean,
use hot soapy water and a cloth. Large spillovers
can cause smoke or a re when subjected to high
temperatures. DO NOT allow food spills with a
high sugar or acid content (such as tomatoes,
sauerkraut, fruit juices or pie lling) to remain on
the surface as they may leave a dull spot even
after cleaning.
2. Clean any soil from the oven frame and the
door liner (see illustration). These areas heat
sufciently during a self-clean to burn soil on.
Clean with hot soapy water.
3. Remove the broiler pan and insert, all utensils
and any foil. These items can not withstand high
cleaning temperatures.
4. Oven racks and oven rack supports must be
removed. If they are not removed the self-cleaning
cycle can not start and Remove Racks will appear in the display indicating that you must
remove the racks and racks supports. When the cycle has nished and the door can be
opened replace the oven rack supports and oven racks.
Find Your Products By Category
Please Login
