0
Owner's of the Electrolux Range Electrolux Range gave it a score of 0 out of 5. Here's how the scores stacked up:
18
Setting Surface Controls
SETTING SURFACE CONTROLS
Your cooktop may be equipped with any combination of the following burners:
Simmer Burner: best used for simmering delicate sauces, etc.
Standard Burner: used for most all surface cooking needs.
Large Burner: best used when bringing large quantities of liquid to temperature and when
preparing larger quantities of food.
Regardless of size, always select a utensil that is suitable for the amount and type of food
being prepared. Select a burner and ame size appropriate to the pan. Never allow ames
to extend beyond the outer edge of the pan.
Your cooktop is also equipped with 270° rotation ame control valves. These valves provide
enhanced control of the burner ame. Each burner lights automatically from an electric ignitor
when its control knob is turned to the LITE position.
!
of the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wood spoons could
catch re if placed too close to a ame.
1. Place cooking utensil on burner.
2. the Surface Control knob to (LITE). For dual ame
burner, make sure to keep the knob setting between the two icons until
the outer ring burner is lit. All electronic ignitors will click at the same
time. However, only the burner you are turning on will ignite.
3. Visually check that the burner has lit.
4. Turn the control knob to the desired ame size. The control knobs do not
have to be set at a particular mark. Use the guides and adjust the ame as
needed. cook with the Surface Control knob in the position.
(The electronic ignitor will continue to click if left in the position, causing
premature wear.)
In the event of an electrical power outage, the surface burners can be lit manually.
To light a surface burner, hold a lit match to the burner head, then slowly turn
the Surface Control knob to . Use caution when lighting surface burners
manually.
Find Your Products By Category
Please Login
