WARNING: ALL ELECTRICAL CONNECTIONS MUST BE
MADE IN ACCORDANCE WITH LOCAL CODES, ORDI-
NANCES, OR NATIONAL ELECTRICAL CODE. IF YOU ARE
UNFAMILIAR WITH METHODS OF INSTALLING ELECTRI-
CAL WIRING, SECURE THE SERVICES OF A QUALIFIED
ELECTRICIAN.
6. Complete electrical wiring in junction box following required
codes and replace junction box. Make sure that all wiring is
safely contained inside.
7. Install light bulb (75 Watt maximum).
8. If the hood is vented, remove charcoal pad from filter. Install
filter.
9. Turn on power and check operation of fan and light. Make sure
that damper operates freely.
USE AND CARE
ALUMINUM FILTER
For greatest efficiency, the permanent-type aluminum filter should
be removed and cleaned periodically. To clean, the filter should
be soaked in hot water and detergent and thoroughly rinsed. The
aluminum filter can be cleaned in a dishwasher.
COMBINATION FILTER
This filter should be inspected periodically and when it becomes
saturated, it should be replaced. There are no effective means of
reactivating this filter.
LIGHTS
Do not use bulb larger than 75 Watts in light socket.
CARE OF EXTERIOR SURFACES
Clean your hood with a mild detergent suitable for painted sur-
faces. DO NOT USE ABRASIVE CLOTH, STEEL WOOL PADS
OR SCOURING POWDERS.
WARNING: ALWAYS DISCONNECT ELECTRIC POWER BE-
FORE SERVICING RANGE HOOD.
CARE OF FAN MOTOR
Fan motor has lifetime sealed bearings that never need oiling
under normal usage. A few drops on each bearing after three
years of heavy usage will prolong the motor life. Clean motor with
a damp cloth and grease-cutting detergent when a heavy coating
of grease
has accumulated.
HO
W TO AVOID A COMMON RANGE-TOP GREASE FIRE
Your range hood provides a protective barrier between the cooking
surface and the cabinets.
Keep fan, filters, and grease-laden surfaces CLEAN according to
the instructions.
Always turn hood ON when cooking at high heat to keep the
cooking area and the hood cooler.
Use high heat settings only when necessary.
Never leave cooking surface unattended. Boil-over causes smok-
ing and greasy spillovers that may ignite.
Always use adequate-sized utensils.
If preparing flaming foods, such as Cherries Jubilee, always turn
hood ON to HIGH to prevent a high heat situation which can cause
damage or fire.
HOW TO EXTINGUISH A COMMON RANGE-TOP GREASE FIRE
Never pick up a flaming pan. If dropped flames can spread quickly.
DO NOT USE WATER! A violent steam explosion may result. Wet
dishcloths or towels are also dangerous.
Smother flames with a close-fitting lid, cookie sheet or metal tray.
Flaming grease can also be extinguished with baking soda or a
multi-purpose dry chemical extinguisher.
Turn off surface units – if you can do so without getting burned.
99043005H
WARRANTY
626850
Key No. Part No. Description
1 97016971 Fan Switch – White (Includes Light Switch)
97016972 Fan Switch – Almond (Includes Light Switch)
97016970 Fan Switch – Black (Includes Light Switch)
97016973 Fan Switch – Biscuit (Includes Light Switch)
2 97016971 Light Switch – White (Includes Fan Switch)
97016972 Light Switch – Almond (Includes Fan Switch)
97016970 Light Switch – Black (Includes Fan Switch)
97016973 Light Switch – Biscuit (Includes Fan Switch)
3 R730088 Motor/Blade Assembly
4 R610045
Filter - Aluminum (use with ducted hoods only)
* R610050 Filter – Ductless
* R610051 Filter Pads – Ductless
5 R566088 Lampholder
6 99091020 Vent Cover - White
99091021 Vent Cover - Almond
99091022 Vent Cover - Black
99091027 Vent Cover - Biscuit
7 R6689601 Wiring Cover - White
R6689602 Wiring Cover - Almond
R6689604 Wiring Cover - Black
R6689605 Wiring Cover - Biscuit
REPLACEMENT PARTS
* Not shown. Purchase separately.
1
2
3
4
5
7
6
Replacement parts
can be ordered on our
website at
www.Broan.com
BROAN-NUTONE ONE YEAR LIMITED WARRANTY
Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in
materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is
found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT
BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does
not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence,
accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to
recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some states do not
allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S
SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty
supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model
number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty
service, you must present evidence of the original purchase date.
Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027 www.broan.com 800-558-1711